System Configuration

WPA-PSK Key: Enter a key as an easy-to-remember form of letters and numbers. The key must be from 8 to 63 characters, which can include spaces. All wireless clients must be configured with the same key to communicate with the VAP interface.

Network Settings

The WAP250G supports DHCP client, DHCP server and Network Address Translation (NAT). Point-to- Point Protocol over Ethernet (PPPoE) is also supported for users that have an IP address assigned automatically from an Internet service provider (ISP) through an ADSL modem. Use the options on the Network Settings pages to configure the LAN and WAN network settings (FIG. 32).

FIG. 32 Network Settings - main page

Network Settings - DHCP Client Setting

Configuring the WAP250G with an IP address enables you to manage the WAP250G from any PC in the attached network. A number of WAP250G features depend on IP addressing to operate.

You can connect to the web browser interface to access IP addressing only if the

WAP250G already has an IP address that is reachable through your network.

By default, the WAP250G is configured with the IP address 192.168.1.240, with the DHCP client disabled (FIG. 33).

FIG. 33 Network Settings - DHCP Client Settings

34

NXA-WAP250G 802.11b/g Wireless Access Point

Page 38
Image 38
AMX NXA-WAP250G manual Network Settings Dhcp Client Setting