AMX NXA-WAP250G Wireless VAP Settings Channel Setting, Wireless VAP 1 Setting Basic Settings

System Configuration

FIG. 28 Wireless VAP 1 Setting - Basic Settings

SSID: The name of the wireless network service provided by the VAP. Clients that want to connect to the network must set their SSID to the same as that of the VAP interface. (Defaults: VAP #1 - AMX1, VAP #2 - AMX2; Range = 1-32 characters).

Broadcast SSID: Enable this option to allow the WAP250G to transmit it’s SSID at regular intervals (every few seconds). This feature is intended to allow clients to dynamically discover and roam between WLANs.

VLAN Id: Enter a unique 12-bit VLAN Id (or VID) for the WAP250G.

Client Access Mode: Select the access mode to be used by the WAP250G (80211g only, or b+g). By default, the access mode is set to b+g.

Wireless VAP Settings - Channel Setting

The WAP250G uses one radio channel in the 2.4 GHz band to communicate with its clients. The radio channel may be set manually by the user or automatically by the system, which selects the channel with the least radio interference (FIG. 29).

FIG. 29 Wireless VAP 1 Setting - Channel Setting

If you experience poor performance, you may be encountering interference from another wireless device. Try changing the channel, as this may eliminate interference and increase performance. Channels 1, 6, and 11, as the three non-overlapping channels in the 2.4 GHz band, are preferred. Using channels other than 1, 6, and 11 can cause degraded performance.

30 NXA-WAP250G 802.11b/g Wireless Access Point