NXA-WAP250G

NXA-WAP250G Specifications (Cont.)

Network Management

Web-browser

 

 

Temperature

• Operating: 0 to 50 °C (32 to 122 °F)

 

• Storage: -20 to 70 °C (32 to 158 °F)

 

 

Humidity

15% to 95% (non-condensing)

 

 

Compliances

• FCC Part 15B Class B

 

• EN 55022 Class B

 

• EN 55024

 

EN61000-3-2

 

EN61000-3-3

 

 

Standards

• IEEE 802.3-2005 10BASE-T, 100BASE-TX

 

• IEEE 802.11b, g

 

Wi-Fi 11b/g, WPA, WPA2, WMM

 

 

Radio Signal Certification

• FCC Part 15C 15.247, 15.207 (2.4 GHz)

 

• EN 300-328

 

• EN 301 489-1

 

• EN 301 489-17

 

• ARIB STD-T66

 

• IC RSS-210

 

 

Safety

• EN 60950-1

 

• IEC 60950-1 (CB)

 

 

Included Accessories:

• AC power adapter set (includes 4 plug snaps)

 

• Category 5 (CAT5) network cable

 

NXA-WAP250G Installation Guide

 

• WallMount/Surface mounting installation kit (including two screws)

 

 

Power Connector

The access point does not have a power switch. It is powered on when connected to the AC power adapter, and the power adapter is connected to a power source. The power adapter automatically adjusts to any voltage between 100-240 volts at 50 or 60 Hz. No voltage range settings are required.

Ethernet Port

The access point has one 10BASE-T/100BASE-TX RJ-45 port that can be attached directly to 10BASE- T/100BASE-TX LAN segments. These segments must conform to the IEEE 802.3-2005 specifications.

This port supports automatic MDI/MDI-X operation, so you can use straight-through cables for all network connections to PCs, switches, or hubs.

Reset Button

The Reset button is used to restart the access point or restore the factory default configuration. If you hold down the button for less than 5 seconds, the access point will perform a hardware reset. If you hold down the button for 5 seconds or more, any configuration changes you may have made are removed, and the factory default configuration is restored to the access point.

4

NXA-WAP250G 802.11b/g Wireless Access Point

Page 8
Image 8
AMX NXA-WAP250G manual Power Connector, Ethernet Port, Reset Button