APC 3000 installation manual  Service port for APC maintenance personnel only

Introduction – UPS Family Range and Components

User interface









!

Output Pwr	Zone
	Probe
	10/100Base-T
Reset
	10/100
	AP9619 Netw







Display: user-control interface used to configure the functionality, monitor the system, set alarm thresholds, and to provide audible and visual alarms.

Network Management Card with Environmental Monitor (AP9619): used for remote system control and monitoring, e-mail notifications etc. See separate manual for the AP9619.

Computer-interface port for the connection of computers with APC Powerchute® software.

Mechanical bypass lever: used to bypass the upstream utility power around the UPS to support the load directly = internal mechanical bypass operation.

Service port (for APC maintenance personnel only).

Display port for the connection of display communication cable.

Documentation storage.

AIS® 3000 10-30kVA, 208V, Site Preparation and Installation Manual – 990-1957 7