Apollo 50, 55, 60, 65 not, Trigger, Trigger, At 60 kts, At 90 kts, Flight Timer, Flight Timer, Flight Timer Trigger, Direct-ToEntry Options

System Functions

Flight Timer Trigger

The following procedure is used to edit the flight timer trigger speed. The flight timer may be set to start at power-up, or when the ground speed exceeds from 10 to 500 knots. The default (factory) setting is 60 knots. The feature may also be turned off.

1. In the Navigation section of the System function, turn the LARGE knob to reach the Flight Timer Trigger page. Press SEL.

SEL

Flight TimerTriggerAt 60 kts

2. Turn the SMALL knob to select the speed value, “At Power On,” or “OFF” and then press ENTER.

ENTER

Flight Timer

Trigger

At 90 ktsDirect-To Entry Options

When you use Direct-To, the Active flight plan (and the FROM, TO, NEXT information) is automatically updated. The “May Clear” and “Never Clears” options affect your flight plan.

If you use Direct-To to center the CDI needle for the current “TO” waypoint, or skip past the TO waypoint to another waypoint already in the Active flight plan, the current leg number of the Active flight plan will be updated, if needed, so that the Direct-To waypoint matches the current “TO” waypoint. In these cases, the Direct-To Entry Option is not a factor.

The Direct-To Entry Option becomes a factor if you go Direct-To a waypoint which is not in the Active flight plan.

7-8