Apollo 50, 55, 60, 65 3.Point C, shows the procedure turn, 5.At point E, the Apollo GX will be in Approach Active operation

D D

ENTER

Approach Examples

1.Point A - At 30 nm west of the MFR airport, you will be prompted to “Enable Approach.” As the current Track Angle is less than 70° to the FAF-MAP leg, sequencing is not suspended.

2.As you cross over the OED VOR (IAF) at point E, the unit will sequence to MA14, because sequencing was not suspended prior to OED.

3.If you still need to fly the procedure turn to lose altitude, set the OBS course for the inbound course. Press DIRECT-TOtwice to reach the OBS page. Use the SMALL and LARGE knobs to select 153° and select OED (IFAF) as the reference waypoint. Verify that waypoint sequencing is set to “auto.” Press ENTER to establish an inbound course. Note that your CDI will “reverse-sense” while outbound, just like a VOR with 153°-TO selected on the OBS. Also, the TO/FROM flag will change to TO.

3.Point C, shows the procedure turn.

4.At point D, you will receive a course intercept alert. Sequencing will be automatically enabled. OED becomes the FAF and the Apollo GX will transition to Approach Active at OED.

5.At point E, the Apollo GX will be in Approach Active operation.

9-67