Apollo 50, 55, 60, 65 manual 300

Troubleshooting

Problem	Possible Cause	Action
Search for nearest	Incorrect selection	Check “Airspace
waypoints reveals	of waypoint types to	Setup” function and
too few or wrong	show after search	verify that the
types of waypoints		desired waypoint
	Runway Limits are	type to search is
	set for a value that	“ON”, see page 10
	is too large
		Check the “Identifier
		and Waypoint
		Type” section of the
		Moving Map
		function on page 6
		Check the Runway
		Limits for too large
		a value, see page
		12
Position fix seems	Wrong seed	Re-enter seed
inaccurate	position	position
Bearing & distance	A mistake may have	Verify that the
values appear to be	been made in	position of the User
wrong	entering the Lat/Lon	waypoint is accurate
	position for a User
	waypoint, or the	Check the FROM
	wrong waypoint was	and TO waypoints
	selected
Wrong bearing and	Incorrect magnetic	Check Magnetic
track values	variation entered	Var option - select
		“Automatic” or
		enter correct value,
		see page 7
Display blinks	Voltage applied to	Check avionics
	system is too low	power bus
No altitude info	Altitude information	Check installation
	device was not	configuration
	configured during
	installation
No altitude info	No power to the	Check altitude
	altitude encoder	encoder power

13-4