WPT SEQ

OBS/HLD

FPL

ENTER

ENTER

Approach Basics (GX50/60)

OBS DTK: 151° to ROARK iaf man brg 356 dtk 356

6.If you do not wish to hold or execute a procedure turn at the next waypoint, press OBS/HLD to enable sequencing at the active waypoint. You may also want to manually select a flight plan leg to intercept. In this case, press FPL, turn the SMALL knob to the desired leg and press ENTER. Press ENTER again to activate it.

Canceling An

Approach

WPT SEQ

OBS/HLD

7.After you have executed the missed approach, you may want to proceed to another destination or you may want to execute the same approach or another approach to the same airport.

Whenever the Approach Active annunciator is lit, an approach may be terminated by a single action of the pilot. You may want to cancel an active approach to try the approach again, choose another approach, to proceed to another airport, or in response to an “Abort Approach” message. In any case, you must follow the appropriate missed approach instructions.

1. Press the OBS/HLD key to cancel the approach.

Canceling an approach does the following:

￿Sequencing is enabled

￿The unit returns to Approach Transition operations

￿Approach Active annunciator turns off

￿Approach annunciator remains turned on

￿CDI scales to 1 nm full-scale deflection

￿RAIM alarm limit goes from 0.3 nm to 1.0 nm

Though you have canceled the active approach, it is still loaded and enabled. You may activate a previous

9-15