Asante Technologies 100TX user manual Management

Management

❏Make sure the Enterprise ID field has a value of all.

❏Type the lowest (beginning) IP address on your network in the Low IP Address field.

❏Type the highest (last) IP address on your network in the Hi IP Address field.

❏Select New in the Discovery Mode field to create a new map, or select Append to attach this map to the map that is stored in your system’s buffer (if any).

5 Click Apply.

IntraSpection builds a map of your network. The map con- tains icons which represent each “discovered” SNMP device on the network. Figure 3-1 is an example map.

Figure 3-1 Discovered network map

6 Click once on the AsantéFAST 100 Hub or AsantéFAST 100 TX Managed Hub’s icon.

The Device Page for the selected hub appears (see Figure Figure 3-2 on page 3-3).

For information on the Device Page’s components, see “Device Page Components” on page 3-2.

For information on performing basic management functions, see “Performing Basic Management Functions” on page 3-7.

Page 3-2