Asante Technologies 100TX user manual Setting Alarms, Page

Setting Alarms

Field	Description	Action
Index	Displays the number of the	This field is read-only; it
	alarm entry.	cannot be edited.
Status	The status of the alarm	Select valid to add an
	entry.	alarm or invalid to delete
		the alarm.
Target Domain	The portion of the device	Select port, group, or
	for which the alarm is to	segment0 (device) from
	be set.	the drop-down menu.
Target Group	The number of the group	Only enter a group num-
	for which the alarm is to	ber if group was selected
	be set.	as the Target Domain.
Target Port	The number of the port for	Only enter a port number
	which the alarm is to be	if port was selected as the
	set.	Target Domain.
Subject	The counter to be polled	Select a counter from the
	for the alarm.	drop-down menu.
		See “Subject” on page 4-
		14 for a description of each
		counter.
Sample Type	The unit of measure for	This field cannot be edited;
	the alarm.	it is always set to event-
		persecond.
Startup Event	Determines when the	Select rising, falling, or ris-
	alarm is to be triggered.	ingANDfalling from the
		drop-down menu.
		See “Startup Event” on
		page 4-15 for a descrip-
		tion of each event.
Threshold	The value that triggers the	Enter an integer.
Value	alarm.
Detected Value	Displays the last measure-	This field is read-only; it
	ment made.	cannot be edited.
Rising Event	The response to occur for	Select a response from the
	a triggered rising event.	drop-down menu.
		See “Rising Event” on
		page 4-15 for a descrip-
		tion of each response.
Falling Event	The response to occur for	Select a response from the
	a triggered falling event.	drop-down menu.
		See “Falling Event” on
		page 4-15 for a descrip-
		tion of each response.

Page 3-25