Asante Technologies 100TX user manual Resetting a Group or Device

Management

Resetting a Group or Device

If you changed the IP address, subnet mask, and/or default gateway for a management module within a device, that management module needs to be reset.

Resets can be performed at the device level (resets the entire stack) or at the group level (resets an individual hub or a management module).

To perform a reset:

1 To reset a group, click once on that group. To reset the device, do NOT select anything.

2 Click Reset.

Depending on what was selected (either a group or the device), the Reset Group or Reset Agent table appears, similar to Figure 3-18 and Figure 3-19.

3

4

Figure 3-18 Group Reset table

Figure 3-19 Device Reset table

Open the Action drop-down menu and select reset.

Click Apply.

The group or device is reset.

▲Important: To abort the reset, click on the browser’s back arrow to go back one page.

Page 3-20