Asante Technologies 100TX user manual Menus, Page, Configurable field determines the counter to be

Menus

Field	Description
Subject	Configurable field; determines the counter to be
	polled.
	❏ readableframes — the total number of good or
	readable frames (frames without error).
	❏ frametoolong — the number of frames that
	were longer than 1,518 bytes.
	❏ runts — the number of frames that were
	shorter than 64 bytes.
	❏ alignmenterrors — the number of frames that
	were an integral number of octets in length
	and did not pass the FCS check.
	❏ fcserrors — the number of frames that failed
	Cyclic Redundancy Check (CRC).
	❏ dataratemismatch — the number of errors
	where the incoming data rate is not within the
	tolerance level of 10Mhz (+ or - 0.01%).
	❏ shortevents — the number of data bursts,
	where data is less than 10 bytes in length.
	❏ collisions — the total number of collisions.
	❏ latecollisions — the number of collisions that
	occurred after the 64-byte collision window.
	❏ autopartitions — the number of times the port
	was automatically partitioned in response to
	31 or more continuous collisions.
	❏ badframes — the number of invalid frames
	(including toolong, runts, misaligned, or bad
	FCS).
Sample Type	Read-only field; sets a unit of measure for the alarm.
	Note: This field is always set to eventpersecond and
	cannot be modified.

Page 4-14