Asante Technologies 100TX user manual Identify

Identify

Configuration

This menu is not a management option; it is a title for the configuration sub-menus listed below it. This menu CANNOT be selected.

Identify

This menu provides read-only and configurable identification informa- tion for the device.

Table 4-2 describes each field in the Identify menu.

ΔNote: For instructions on using this menu, see “Config- uring Device Identification Information” on page 3-11.

	Table 4-2 Identify Menu
Field	Description
Physical Address	Read-only field; displays the device’s hardware
	address.
Object ID	Read-only field; displays the device’s SNMP identify-
	ing number.
Description	Read-only field; displays a description of the device.
Name	Configurable field; assigns a name to the device.
	Note: A maximum of 254 characters (including
	spaces) is allowed.
Location	Configurable field; assigns a location to the device
	(where the device is physically located).
	Note: A maximum of 254 characters (including
	spaces) is allowed.
Contact	Configurable field; assigns a name of the person
	responsible for the device.
	Note: A maximum of 254 characters (including
	spaces) is allowed.
Up Time	Read-only field; displays the amount of time the
	device has been operational since the last time it was
	off-line.
Interfaces	Read-only field; displays the number of network inter-
	faces present on this device.

Page 4-3