Asante Technologies 100TX user manual Modules

Modules

Modules

This menu provides read-only information on each group within the device.

Table 4-4 describes each field in the Modules menu.

ΔNote: For instructions on using this menu, see “Viewing Module Information” on page 3-15.

	Table 4-4 Modules Menu
Field	Description
Group Index	Read-only field; displays the number of the selected
	group.
Number of Ports	Read-only field; displays the total number of ports in
	the group.
Module Type	Read-only field; displays the type of module of the
	selected group. For example, FastHub100 or Manage-
	ment Module.
	Note: The table displays entries for groups 1 through
	15; a module type of empty means that there is physi-
	cally no group in that position in the device. See
	“Group Numbering” on page 3-3 for more informa-
	tion on groups and group numbering.
Description	Read-only field; displays a description of the group.
HW Revision	Read-only field; displays the hardware revision num-
Number	ber of the device.
State	Read-only field; displays the state of the module.
	❏ OK — the module is not a “master” module (it
	does not manage other devices within the
	stack) and is currently operating.
	❏ Fail — a problem with the module’s board has
	been detected.
	❏ Master NMM — the module is a “master”
	module (it manages other devices in the
	stack).
	❏ Standby NMM — the module is capable of
	being a “master” module.

Page 4-5