Asante Technologies 100TX user manual Viewing Statistics, Table Statistics

Management

Viewing Statistics

Statistics for an AsantéFAST 100 Hub stack can be viewed in two differ- ent formats: table or graph. Statistics collected include runts, alignment errors, late collisions, short events, good frames, and bad frames.

Table Statistics

1 Select a group or a port for which statistics are to be gathered by clicking on it once. To view statistics for the device (entire hub stack), do NOT select anything.

2 Click Table.

Table statistics appear for the group, port, or device selected, similar to Figure 3-27.

Figure 3-27 Table Statistics

For a description of each object, see “Statistics” on page 4-17.

3 Open the Sampling Interval drop-down menu and select the number of seconds to poll for statistics.

Statistics are automatically gathered in the following col- umns:

❏Curr — (current) the number of occurrences each second.

❏Peak — the largest number of occurrences since opening or resetting the screen.

❏Avg — (average) the average number of occur- rences since opening or resetting the screen.

❏Total — the total number of occurrences since opening or resetting the screen.

4 Click Reset to reset the counters to zero.

Page 3-30