Asante Technologies 100TX user manual Port Security, Allowed Address, Violation Action

Menus

Security

This menu is not a management option; it is a title for the sub-menus listed below it. This menu CANNOT be selected.

Port Security

This menu allows you to control access to ports by specifying the physi- cal addresses that are allowed to connect to certain ports. If an unau- thorized physical address attempts to connect to the restricted port, an action (such as partition the port, send a trap, etc) can occur.

Table 4-15 describes each field in the Port Security menu.

ΔNote: For instructions on using this menu, see“Setting Port Security” on page 3-28.

	Table 4-15 Port Security Menu
Field		Description
Group Index	Read-only field; displays the number of the group
	selected.
Port Index	Read-only field; displays the number of the port on
	the group.
Status	Configurable field; determines the status of the entry.
	❏ valid — entry is active.
	❏ invalid — entry is inactive (deletes the entry).
Allowed Address	Configurable field; displays the physical address that
	is allowed to connect to the specified port.
Violation Action	Configurable field; the action to occur if the physical
	address does not match the Allowed Address.
	❏ partitionport — partitions the target port.
	❏	sendtrap — sends a trap to the receiving sta-
		tion.
	❏ partitionportANDsendtrap — partitions the
		target port and sends a trap.
	❏ sendtrapANDrequestpage — sends a trap and
		sends a page to the network administrator (if
		the trap receiving station is an AsantéView
		Management Station).
	❏	partitionportANDsendtrapANDrequestpage
		— partitions the target port, sends a trap, and
		send a page to the network administrator .

Page 4-20