Removing and Covering the Auto Answer Button | AT&T 8102, 8110

Removing and Covering the Auto Answer Button

If you are have an 8110 telephone, you may want to disable the Auto Answer button ([ Auto ]) so that it cannot be activated accidentally. Follow this procedure to remove the Auto Answer button and cover the opening from which you removed the button.

Note: To complete this procedure, you will need the slot cover which is shipped in the box with the telephone. You may also need a pair of needlenose pliers.

1Press [ Auto ] so that the button is in the "up" position

2Lift the button from its slot on the face of the telephone. (You will probably want to use a set of needlenose pliers for this task.) See Figure 11.

3Take the slot cover (provided with the telephone) and place it in a horizontal position in the empty slot. See Figure 11. Be sure that the cap is snug with the face of the telephone.

19

Image 22

AT&T 8102, 8110 user manual Removing and Covering the Auto Answer Button

Contents

AT&T Trademarks Contents Important Safety Instructions Use Service Consignes DE Securite Importantes Emploi Conservez CES Instructions Entretien Your 8102 and 8110 Telephones Appendix BPage TOP View 8110 Telephone Top, Side, and Bottom Views Handset Adjunct equipment jack On the 8102 only Auto Answer button On the 8110 only Flash button Tone Selector Fast or Slow Ringer Volume controlProgram button Line jack Installing Your Telephone Table/Desk Installation Handset cord jack Handset jack Wall Installation Rotating the Handset Tab Triangle Mounting studs Base Base Locking Tab Voice Terminal Wall Using the Features Labeling the Programmable Dialing Button Designation Card Removing and Covering the Auto Answer Button Page Using the Features Answering and Placing a Call To place a call using the speakerphone for 8110 users To end a call Auto Answer for 8110 Users To turn off the Auto Answer featureTo have your telephone automatically answer a call To put a call on hold FlashHold To return to the held call Message Mute for 8110 Users Personalized Ring Programmable Dialing Buttons Programmable Dialing Buttons To dial a number with a programmable dialing button Redial With Auto-PauseTo erase a number stored on a programmable dialing button To erase ALL stored access codes To program an automatic pause for redialed numbers To prevent other party from hearing you To mute microphone Speakerphone for 8110 UsersTo place/answer a call without lifting the handset To change from speakerphone to handset Appendix a Page Originating Calls Appendix BAnswering Calls Putting Calls on Hold Switching from the Headset to the Handset Auxiliary Power for the 8110 Telephone Appendix C Appendix D If Your Telephone Does Not Respond FCC Registration and Repair Information Connection and USE with the Nationwide Telephone Network Interference Information Right of the Telephone Company AT&T Warranty Information Erasing a Number in Memory Storing Numbers in MemoryDialing Numbers in Memory Holding and Returning to a Call Using the Built-in Speakerphone For 8110 Users Only Using the Auto Answer Feature For 8110 Users Only Comcode 555-015-131 Graphics AT&T Issue 2, March