To program an automatic pause for redialed numbers
1While the telephone is
press the PROGRAM button | [programming tone] |
2Press [ Redial ]
3Press the appropriate access code and number of pauses in order to insert a long enough waiting time to obtain a second dial tone.
For example, if you need 2 pauses inserted between the access code, such as 9, and the remainder of the telephone number you are dialing, press the PAUSE button twice
Note: You may store up to 3 different access code/pause combinations. Each code can have up to 3 characters and up to 4 pauses.
4Press the PROGRAM button again
EXAMPLE: In the following example, there are 3 different access code/pause combinations.
1 Press the PROGRAM button
2Press [ Redial ]
3Dial 9 and then press the PAUSE button 3 times (PAUSE PAUSE PAUSE). Since each depression of the PAUSE button adds
.5 seconds of waiting time, 3 depressions of the PAUSE button will add 1.5 seconds of waiting time.
4Dial *9 (the second access code needed in the dialing sequence in this example) and then press the PAUSE button 2 times (PAUSE PAUSE)
5Dial *8 (the third access code needed in this sequence) and then press the PAUSE button 4 times (PAUSE PAUSE PAUSE PAUSE)
6Press the PROGRAM button again
●The access code sequence is stored for redialing at a later time. Now, when you press [ Redial ] to redial a call using one of the above access code/pause combinations (for example,
9 1 212 555 1234), the telephone will automatically insert the correct number of pauses (3 in this example) to ensure waiting the appropriate length of time to obtain a second dial tone.
To erase ALL stored access codes
1 Press the PROGRAM button | [programming tone] |
2Press [ Redial ] twice
3Press the PROGRAM button again
29
