AT&T 8102 Auto Answer for 8110 Users, To have your telephone automatically answer a call

Spkr ] to end call

Auto Answer (for 8110 Users)

Automatically answers the call and turns on the built-in speakerphone on the 8110 telephone. When this feature is activated, the telephone rings once, and then an alerter tone sounds to notify you that the call has been answered. Your telephone will automatically drop the call and be ready for the next call when the calling party hangs up.

Note: If you are using the 8110 telephone with a System 85 or a DEFINITY Generic 2 switch, the line must be assigned as "Data Restricted" in order for the telephone to work properly. Please contact your System Administrator to have this feature assigned to your line.

To have your telephone automatically answer a call

1While handset is on-hook, press [ Auto ]

●Button released to the "up" position

●Colored area on bottom of button reminds you that Auto Answer feature is active

2When a call comes in, the built-in speakerphone on your telephone is automatically activated

3

4

●Both you and the other party hear a full ring and then a short burst of tone

●Red light next to [ Spkr ] goes on

Speak to caller

When caller ends the call, 8110 telephone hangs up automatically or

You can press [

●The 8110 telephone is now ready for next Auto Answer call

To turn off the Auto Answer feature

1Press [ Auto ]

● Button reverts to "down" position

23