AT&T 8110, 8102 Redial With Auto-Pause, To dial a number with a programmable dialing button

To dial a number with a programmable dialing button

1Pick up handset o r

if you are using an 8110 telephone, you can press [ Spkr ]

2When you hear dial tone, press appropriate programmable dialing button

● Number programmed on the button is automatically dialed

To erase a number stored on a programmable dialing button

1Press the PROGRAM button

2Press button to be cleared twice

3Press the PROGRAM button

or

lift handset

Redial (With Auto-Pause)

The Redial feature automatically redials the last number you dialed from the dial pad, either an extension or an outside number. Use to save time in redialing a busy or unanswered number. The number you redial can be up to 20 digits.

The Auto-Pause feature can automatically insert pauses after a dial access code (such as, 9) in a redialed number. If you usually wait a short period to obtain a second dial tone after dialing an access code, you can set the waiting time needed by the Redial feature by programming the Auto-Pause feature as described below.

To automatically redial the last number dialed from the dial pad

1Pick up handset or

if you are using an 8110 telephone, you can press [ Spkr ] [dial tone]

2Press [ Redial ]

● Number is automatically redialed

Note: You will hear a rapid error tone if the dialed number is longer than 20 elements.

28