Operation During, Power Failure, Screen Displays | AT&T 945 guide

IN CASE OF DIFFICULTY

TELEPHONE OPERATION

PROBLEM	SOLUTION
Operation During	This phone will operate during a power
a Power Failure	failure if a working battery has been installed.
	You will be able to answer calls with the
	handset or headset, and dial calls using the
	keypad and the One Touch or Redial features.
	No other features will work until power is
	restored.

PROBLEM	SOLUTION
The Screen Displays	The phone has been disconnected from AC
Powerfail	power. When power is restored, a key is
	pressed, or the phone is taken off the hook,
	the screen will return to the usual display.
	One Touch and Redial numbers are retained
	until power is restored.

PROBLEM	SOLUTION
Display Screen	Make sure the power cord is connected
is Blank	to both the phone and an electrical outlet
	not controlled by a wall switch.

PROBLEM	SOLUTION
Intercom, Hold, Line	If you are a DSL customer, you may need
Privacy or Other	to arrange for installation of a splitter and an
Advanced Features Do	AT&T Z800A filter. See “DSL Users”
Not Work Properly	beginning on page 4 for details.

90

Image 94

AT&T 945 user manual Operation During, Power Failure, Screen Displays, Display Screen, Is Blank

Contents

DRAFT#3 Part 1 Important Product Information Advanced American Telephones. All Rights Reserved Contents Adding a Product Overview Before YOU Begin Parts ListTools Needed Beforeyou Begin DSL Users Set-Up for DSL Users Glossary Programmable Features List Automatic Audible Signals Installation Battery Installation Battery Installation Table/Desk Installation Two Two-Line Jacks Connect the handset cord Table/Desk InstallationConnect the power adapter to the telephone Check for dial tone Wall Installation Wall Installation Mount the phone on the wall Four One-Line Jacks Two Two-Line Jacks Convenience Ports Standard electrical outlet AUX L4 jack AUX L3 jack Feature Setup Feature Setup Rapid Scroll Set One Touch Preference Set One Touch Preference Assign an Extension Number To Your Phone Assign an Extension Number to Your Phone Turn the Ringer On or Off for Each Line Turn the Ringer On or Off for Each Line Select the Ringer Type Select the Ringer Type Set Delay Ring Press or to change the delay ring setting Off, 2 sec…30 sec Set Delay Ring Turn Auto-Mute On or Off Turn Auto-Mute On or Off Set Dial Mode Set Dial Mode Turn Hold Reminder On or Off Press or to toggle between On and Off Turn Hold Reminder On or Off Set the Time and Date Set the Time and Date from Turn Line Usage On or Off for Each Line Turn Line Usage On or Off for Each Line Assign the Prime Line Line Preference Assign the Prime Line Line Preference Set Automatic Mode Press or to toggle between Set Automatic Mode Set the Scroll Rate Set the Scroll Rate Turn Screen Backlight On or Off Turn Screen Backlight On or Off Erase All Settings and Return the Phone to Default Settings Erase All Settings and Return the Phone to Default Settings Then, press E. The screen displays Assign the Line Group For this Phone Feature Setup Set This Phone to be the Centrex Console Phone Then, press E. The screen displays Set the Centrex Console Delayed Ring Time Feature Setup Set the Display Language Make or Answer a Call Telephone OperationHandset Make or Answer a Call SpeakerphoneHeadset To answer a call, press h. Press h Switch Between Handset, Headset and Speakerphone Timer Call Privacy Cancel Call PrivacyRestore Call Privacy Do Not Disturb Volume Redial Redial Stack Auto Redial Switch Between Lines Hold Flash To activate this feature, press and release MMute Temporary Tone Dialing To talk privately with one party Conference CallsTo drop one line Blind Transfer Transfer a CallTransfer a Call and Speak to the Receiving Party Low Battery Indicator Answer a Transferred Call Lights and What They Mean Light Status Means ONE Touch Operation Onetouch Operation Store a Number in a One Touch Location Store a Pause in a One Touch Entry Store a Flash in a One Touch Entry Store Temporary Touch Tone signals in a One Touch EntryStore a Number in a One Touch Location Review a One Touch Entry Review a One Touch Entry If One Touch Preference is set to Intercom Dial a One Touch NumberIf One Touch Preference is set to Telephone Intercom Operation Intercom Operation Basic Intercom Operations Operation Function Make an Intercom Call with the Handset Make an Intercom Call with Speakerphone or Headset Answer an Intercom Call End an Intercom or Page Call Answer a Single-phone A Specific ExtensionSingle-phone Auto-Mute Off All System Phones Answer a System-wide Room Monitor Make an Intercom Conference Call Using a Fax Switch Adding a FAX Machine General Product Care Battery Technical SpecificationsPower Adapter Intercom Signal Frequency Telephone Does Case of DifficultyNo Dial Tone Not Ring Repeating Short Ring Error Ring Sounds atSignal Not Received All Extensions When Line Lights Remain On When No Line isTone Signals Do Connected Screen Displays Power FailureOperation During Display Screen Expanding the Phone System Line Groups Private Lines Enabling the Console Phone Setup ChecklistCentrex Operation Console Operation Answering a Delayed Ring Setting Ring Delay DurationPicking Up Another Station’s Line Index Autoredial DND Lights Line 1 phone number Line button Private line Programming mode PRV Pulse Index