AT&T 945 user manual Redial Stack, Auto Redial

		Redial Stack
		The last six numbers dialed on this phone are
		automatically stored in the redial memory stack.
		You can review the numbers in the redial memory
OPERATION		and dial one if you wish.
	◗	1 When the phone is not on a call, press
		R.
		2 Press +or -to scroll through the last six
	◗◗◗◗	numbers dialed at this phone.
		3 When the number you want to call is displayed,
		press Eor a LINE button. The call is dialed
		automatically using the mode (headset or
		speakerphone) you programmed as the
		Automatic Mode. (See “Set Automatic Mode”
TELEPHONE		on page 41.)
	◗	to find the number you want to call.
		NOTE: If you do not place a call within 30 seconds,
		the screen returns to idle.
		Auto Redial
		This phone can automatically redial a number every 60
		seconds up to ten times, until the other line rings or you
		cancel Auto Redial.
		1 Follow the instructions under “Redial Stack”
		2 Press a LINE button
	◗◗◗◗	— OR —
		Press E. The phone will dial the call.
		3 When the other line rings or the other party
	❖	answers, lift the handset
		— OR —
	❖	Press K
		— OR —
		Press hand speak with the other party.
		NOTE: You will hear a double-beep if you press
		hwhen the headset is not plugged in.
		To cancel Auto Redial, press any button except VOLUME
		+or VOLUME -.
	62