ATTO Technology 1550D/E, 1500D/E operation manual Maintenance commands

2.2.4 Maintenance commands

The CLI commands outlined in this chapter may be used to get information or perform functions which are used in a variety of situations with the ATTO iPBridge.

FirmwareRestart

Causes the iPBridge to reboot, then re-initialize its firmware.

Immediate command: FirmwareRestart

Password

RestoreConfiguration default sets the password to the default value

Passwords are case sensitive, 0-32 characters with no spaces

When the password is all 0s, Telnet and ftp do not validate the password and MD5 authentication are disabled.

Default: Password

Set syntax: set Password

Requires a SaveConfiguration command

Reserve

Reservation of the iPBridge is implicit: once the configuration image is changed by any user of services, the iPBridge becomes RESERVED. Executing a SaveConfiguration or\ Restore configuration RELEASES the iPBridge so that other services users may access it. When iPBridge services interface is RESERVED, set commands from other users are unavailable.

At least one interface must always have access to the iPBridge.

Immediate command: Reserve

RestoreConfiguration

Restores configuration to either the default configuration or the configuration last saved into non-volatile memory. The saved option will undo any changes made since the last save.

Immediate command: RestoreConfiguration [Default Saved]

SCSIPortReset

Resets the specified SCSI bus.

Immediate command: SCSIPortReset [sb]

SpeedWrite

When enabled, improves the performance of FCP WRITE commands to SCSI devices attached to the iPBridge. Specify SCSI bus (sb), target (st), LUN (sl) of a mapped SCSI device or (all) for each currently mapped device

Set syntax: set SpeedWrite SCSI [sb st sl all] [enableddisabled]

Get syntax: get SpeedWrite SCSI [sb st slall]

SpeedWriteDefault

When enabled, SpeedWrite performance enhancement is set as the default for any subsequent SCSI devices mapped manually or via an AutoMap operation. If disabled, the iPBridge will not attempt SpeedWrite performance enhancement to newly-mapped SCSI devices.

Default: disabled

Set syntax: set SpeedWriteDefault [enabled disabled]

Get syntax: get SpeedWriteDefault

Username

Specifies username for all Telnet, FTP and ExpressNAV web server sessions.The username is case insensitive, 1- 32 characters, no spaces You must have the Admin password to change Username.

Default: root

Set syntax: set Username [username]

Requires a SaveConfiguration command

Get syntax: get Username

29

ATTO Technology Inc. iPBridge Installation and Operation Manual