ModelNumber

Controls the iPBridge model number string to an OEM- specific value. Displays during POST and by using the Info CLI command. ID is padded with 0s to a maximum of 8 characters

Default:1500 or 1550

Set syntax: set ModelNumber [string]

Requires a SaveConfiguration command

Get syntax: get ModelNumber

ProductID

Controls the iPBridge product ID string to an OEM- specific value. Displays during POST and the CLI Info command. ID is padded with 0s to a maximum of 16 characters

Default: iPBridge

Set syntax: set ProductID [string]

Requires a SaveConfiguration command

Get syntax: get ProductID

OEMConfigFile

Reports the name of the OEM Configuration file stored in persistent memory. If no file is present, ATTO is returned. The file is an ASCII text file which contains all the CLI commands that can be used to override the factory default settings of the iPBridge. It consists of a header record and a list of CLI commands. Each line may contain up to 128 characters and must be terminated by any of the standard EOL combinations such as \r, \n, or \r\n. Updates may be loaded via any of the current firmware update methods (see Updating firmware on page 47).

Default: ATTO

Get syntax: get OEMConfigFile

VendorID

Controls the iPBridge vender ID string to an OEM- specific value. Displays during POST and the CLI Info command. is padded with 0s to a maximum of 8 characters

Default: ATTO

Set syntax: set VendorID

Requires a SaveConfiguration command

Get syntax: get VendorID

The following table lists the CLI commands supported in the OEM configuration (*.cfg) file. Any command which displays information is not honored in the *.cfg file, i.e., only the set version of commands will be honored.

OEM Config file supported commands

 

AutoMapOnBoot

iSCSIChap

Route

BridgeName

iSCSIChapSecret

SCSIInitID

ColdReset

iSCSIPortNumber

SCSIPortBusSpeed

DPMTU

iSCSITarget

SCSIPortResetOnStartup

EthernetControl

ISNSServer

SCSIPortSyncTransfer

EthernetSpeed

iSNSLoginControl

SCSIPortWideTransfer

InquiryProductID

iqnVendorPrefixID

SCSITermination

InquiryVendorID

ModelNumber

SerialPortBaudRate

IPAddress

MultiTargetMode

SerialPortEcho

IPDHCP

Password

SpeedWrite

IPGateway

ProductID

SpeedWriteDefault

IPSubnetMask

ReadOnlyPassword

Username

iSCSIAlias

ReadOnlyUsername

VendorID

 

RMON

 

42 Configuration: CLI

Page 51
Image 51
ATTO Technology 1500D/E, 1550D/E operation manual ModelNumber, ProductID, VendorID, OEM Config file supported commands