Manuals / Brands / Computer Equipment / Network Router / ATTO Technology / Computer Equipment / Network Router

ATTO Technology 1500D/E, 1550D/E 2.2.6 Serial port configuration commands

1 62

Download 62 pages, 1.21 Mb

33

ATTO Technology Inc. iPBridge Installation and Operation Manual

2.2.6 Serial port configuration commands

The ATTO iPBridge

serial ports or serial headers are configured with default settings but may be

customized to your specifications using the CLI commands in this section.

SerialPortBaudRate

Configures/reports the baud rate for the iPBridge RS-232

serial port or serial header. The number of data bits per

character is fixed at 8 with no parity. Choices are 2400,

9600, 19200, 38400, 57600 and 115200.

Default: 115200

Set syntax: set SerialPortBaudRate [2400 | 9600 |19200

| 38400 | 57600 |115200]

Requires a SaveConfiguration command

Get syntax: get SerialPortBaudRate

SerialPortEcho

Enables/disables/reports the echoing of keyboard input.

When enabled, all non-control character keyboard input

is output to the display.Local ASCII terminal (or terminal

emulator) echo settings should be set to disabled while

using SerialPortEcho enabled

Default: enabled

Set syntax: set SerialPortEcho [enabled | disabled]

Requires a SaveConfiguration Restart command

Get syntax: get SerialPortEcho

Contents

Main Page Page Contents Introduction: iSCSI provides storage options 1 Setting up the iPBridge .....................................................................1 1.1 ATTO iPBridge 1500E ..........................................................3 1.2 ATTO iPBridge 1500D ..........................................................5 1.5 Connecting SCSI devices to the SCSI port ........................11 1.6 Configuring the iPBridge .....................................................13 2 Managing the iPBridge ......................................................................17 2.1 ExpressNAV provides web-based interface ......................19 2.2.3 Diagnostic commands ...........................................27 2.2.4 Maintenance commands ........................................29 2.2.5 SCSI configuration commands .............................31 2.2.6 Serial port configuration commands ....................33 2.2.7 Ethernet commands ...............................................35 2.2.8 iSCSI commands ....................................................37 Page Introduction: iSCSI provides storage options Glossary Introduction 1 Setting up the iPBridge 2 Installation 2-Gb FC Switch Storage Arrays Gb-E Switch Possible S AN/NAS configuration Ethernet Fibre Channel SCSI embedded ATTO FibreBridge 1.1 ATTO iPBridge 1500E 4 Installation: ATTO iPBridge 1500E Exhibit 1.1-1 iPBridge 1500E board layout Exhibit 1.1-2 iPBridge 1500E board profile and dimensions 1.2 ATTO iPBridge 1500D 6 Installation: ATTO iPBridge 1500D Exhibit 1.2-1 iPBridge 1500D back panel 1.3 ATTO iPBridge 1550E 8 Installation: ATTO iPBridge 1550E Exhibit 1.3-1 iPBridge 1550E board layout Exhibit 1.3-2 iPBridge 1550E board profile and dimensions 1.4 ATTO iPBridge 1550D 10 Installation: ATTO iPBridge 1550D Exhibit 1.4-1 iPBridge 1550D back panel 1.5 Connecting SCSI devices to the SCSI port Cabling 1.6 Configuring the iPBridge Connecting using the GbE port Using ATTO ExpressNAV Connecting using the serial port Using Telnet Page 2 Managing the iPBridge Page 2.1 ExpressNAV provides web-based interface Page 21 2.2 CLI provides ASCII-based interface Ready. Ready. * FirmwareRestar Ready Page 23 2.2.1 CLI commands summary 24 Configuration: CLI 25 2.2.2 General use commands These CLI commands are used in a variety of situations Help Password ReadOnlyPassword ReadOnlyUsername VerboseMode 27 2.2.3 Diagnostic commands ATTO iPBridge diagnostic commands help validate iPBridge operation and di agnose/isolate iPBridge faults. CLI Error Messages The following error messages may be returned by the Command line Interface: 29 2.2.4 Maintenance commands Page 31 2.2.5 SCSI configuration commands Page 33 2.2.6 Serial port configuration commands The ATTO iPBridge Page 35 2.2.7 Ethernet commands These commands configure the management and data Ethernet ports including Telnet parameters. Page 37 2.2.8 iSCSI commands You may customize the iPBridge to your specifications using the CLI commands in this section. Page 39 2.2.9 Mapping commands You may map devices via the web-based server or through the management or serial ports. Page 2.2.10 Privileged OEM configuration services Page 2.3 Mapping devices Single target mode 44 Configuration & Management: mapping Exhibit 2.3-1 Physical and virtual connection possibilities with the iPBridge Mapping: single vs. multiple target mode Node iqn.1995-12.com.attotech:ipbridgesn-ipb1500000123-dev0 Multiple target mode 46 Configuration & Management: mapping Targe t Nam e sl st Example Exhibit 2.3-2 Result of typing SCSITargets 0 Exhibit 2.3-3 Result of typing RouteDisplay iSCSI 2.4 Updating firmware Page Appendix A Safety standards and compliances FCC Standards: Radio and Television Interference Canadian Standards European Standards Appendix B ATTO accessories iSCSI Bridge board-level models iSCSI Bridge desktop models & desktop models with rackmount kits NDMP Bridge models ATTO FC Rack System (build to order) SCSI cables & accessories Cables/SCSI Accessories Appendix C Contact ATTO Technology, Inc.