Making Calls
through - first you have to dial one or more digits to obtain an outside line, access your corporate telephone network, or add some other code before you can return the call. As of Release 1.8, the 4620 IP Telephone can, if appropriately administered, automatically dial those “extra” digits for you. So with one touch, the telephone automatically dials
If all lines are in use, automatic dialing will not work.
Redialing a party
Depending on how you have set up your Redial option, selecting Redial automatically dials the most recent number dialed, or displays a list of the last six outgoing calls for selection of the number to be dialed. Chapter 6: 4620/4620SW/4621SW IP Telephone Options, covers setting the Redial feature. Both procedures follow.
Note:
Your Telephone Administrator can turn off the Redial feature, or can restrict your phone to dialing only the last number dialed. If the Redial feature is turned off, pressing the Redial button generates an error tone. If the Redial feature is restricted to only the last number dialed, follow the instructions below for redialing the last number called.
Redialing the last number called:
Press the Redial ( 
) Feature button.
The last number dialed is automatically redialed.
Redialing using a list of the last six numbers called:
1.Press the Redial ( 
) Feature button.
The Redial screen displays the last six unique numbers dialed and the prompt “Select number to dial.” appears at the top of the display.
2.Press the Line/Feature button associated with the number you want to redial.
If the call can be dialed, the Phone application screen displays and the selected number dials automatically.
If the selected number cannot be dialed (for example, if all call appearance lines are currently on Hold), all Redial entries are disabled. If you press a number for redialing while in this state, an error beep tone sounds and no further action occurs.
3.Proceed with the call.
A Call Log entry is created for this call.
Issue 2.2 April 2005 25
