Avaya 4621SW IP manual Ringing Incoming Tones Meaning, Feedback Handset Tones Meaning

Telephone Management and Troubleshooting

Ringing (Incoming) Tones		Meaning
1	Ring --------	Call from another extension.
2	Rings ------- -------	Call from outside or the System Administrator.
3	Rings ------ ------ ------	Priority call from another extension, or from an
		Automatic Callback call you placed.
Half Ring (ring-ping) ---		A call is being redirected from your phone to
		another because Send All Calls or Call
		Forwarding All Calls is active.

Feedback (Handset) Tones	Meaning
Busy --- --- ---	Low-pitched, rapid tone (repeated 60 times
	per minute), signifying the number dialed is
	in use.
Call Waiting Ringback Tone ---_	A ringback tone with lower-pitched signal at
	the end. This indicates the extension called
	is busy and the called party was given a call
	waiting tone.
Confirmation -- -- --	Three short tone bursts. This indicates a
	feature activation or cancellation was
	accepted.
Coverage -	One short tone burst. This indicates your
	call will be sent to another extension for a
	covering user to answer.
Dial ---------	Continuous tone indicating dialing can start.
Intercept/Time-out -_-_-_-	Alternating high and low tone indicating a
	dialing error, denial of a requested service,
	or failure to dial within a preset interval
	(usually 10 seconds) after lifting the handset
	or dialing the previous digit.
Recall Dial - - - -----------	Three shorts tone bursts followed by a
	steady dial tone indicate a feature request
	was accepted and dialing can start.
Reorder -- -- -- -- -- --	Fast busy tone repeated every half-second
	indicate all phone trunk lines are busy.
Ringback ---- ---- ---- ----	Low-pitched tone repeated 15 times a
	minute indicates the number dialed is
	ringing.

80 4620/4620SW/4621SW IP Telephone Release 2.2 User Guide