Chapter 9
70 Avaya C460 SMON User Guide
•Refreshing the Protocol List
•Searching for a Protocol
Adding Protocols
The User Protocols list can only contain seven protocols. Before adding a
protocol when there are already seven, you must remove a protocol from
the list. For more information on deleting protocols, refer to “Deleting
Protocols” on page 71.
To add listed protocols to the User Protocols list:
Double-click the protocol to monitor in the Protocol List.
Or
Select one or more protocols in the Protocol List, and click Add. The
selected protocol is added to the User Protocols list and is highlighted
in cyan.
Adding a User Defined Protocol
This feature enables you to add a new protocol that does not exist in the
Protocol List or Active Protocols List.
To add a new protocol:
1. Select the User Defined tab.
Figure 9-3. User Defined Protocol Dialog Box
2. Enter the protocol description in the Description field.
3. Enter the port number in the Port field, an integer from 1 to 8191.
4. Select the port type, UDP or TCP, from the Type pull-down list box.
5. Click Add. The new protocol is added to the User Protocols list
highlighted in cyan.
6. Click Apply. The new protocol information is sent to the device.