Chapter 4: Web Interface Operations

43

 

 

3.Enter the name and password of the new user in the blanks provided.

4.Select the preemption and access levels for the new user.

5.Click the Save button to complete the process.

To delete a user account (Administrator only):

1.On the side menu bar, select Local Accounts. The current user list will be displayed.

2.Click the box to the left of each account that you wish to delete, then click the delete button.

To edit a user account (Administrator or active user only):

1.On the side menu bar, select local accounts. The current user list will be displayed.

2.Click the name of the user you wish to edit. A user profile will appear.

3.Edit the user account as needed, then click Save.

Managing device properties

Viewing and changing appliance configuration information

The AutoView 3100/3200 switch can report most device properties directly through the AutoView switch web browser.

NOTE: Users can view all appliance information, but only Administrators can change settings.

Table 4.2: Viewing Appliance Information

To do this:

Select this:

 

 

Display the unit’s name or type

Appliance - Overview

 

 

Display a list of available target devices, their

Target Devices

type and status

 

 

 

Enter, change or display the unit’s network

Appliance - Appliance Settings - Network

address, gateway address, subnet mask, MAC

 

address, LAN speed, DHCP enable status or

 

ICMP ping reply status

 

 

 

Display the unit’s current firmware revision for

Appliance - Appliance Settings - Versions

application, boot and Video FPGA

 

 

 

Display a list of the attached AVRIQ modules and

Appliance - Appliance Settings - Ports - AVRIQ modules

their status

 

 

 

Display a list of active KVM sessions and

Appliance - Appliance Settings - Sessions - Active

their duration

 

 

 

Display a list of devices attached to the AutoView

Appliance - Appliance Settings - Sessions - Active

3100/3200 switch

 

 

 

Page 55
Image 55
Avocent 3100/3200 manual Managing device properties, To delete a user account Administrator only