Avocent 3100/3200 manual To remove a target device from the Scan list, To start the Scan mode

Chapter 3: Local Port Operation 27

4.Type the first few characters of a target device name or port number to scan. The first matching target device will appear in the line.

-or-

Press the following keyboard commands in the Name, Port or Time column to move through the list of target devices available to scan.

a.Press Alt+Down Arrow to move the cursor down through the list of target devices.

b.Press Alt+Up Arrow to move the cursor up through the list of target devices.

c.Press Alt+Home to move the cursor to the first target device in the list.

d.Press Alt+End to move the cursor to the last target device in the list.

5.In the Time column, type the number of seconds (from 3-255) of desired time before the scan moves to the next target device in the sequence.

6.Move the cursor to the next line or press Down Arrow and repeat steps 2-5 for each of the remaining target devices to be included in the scan pattern.

7.Click OK to save your settings.

To remove a target device from the Scan list:

1.In the Scan dialog box, click the target device to be removed.

2.Press Delete. -or-

Press Shift+Delete to remove the selected target device and all entries below it.

3.Click OK to save your settings.

To start the Scan mode:

1.If the OSCAR interface is not open, press Print Screen to open the Main dialog box.

2.Click Commands to open the Commands dialog box as shown in Figure 3.12.

Figure 3.12: OSCAR Interface Commands Dialog Box