
Appendices 69
Appendix B: Using AVRIQ-SRL modules
The
AVRIQ-SRL module modes
The following modes can be accessed from the
•
•Configuration: This mode enables you to specify AutoView 3100/3200 switch communication parameters, the appearance of the Terminal Applications menu and key combinations for spe- cific actions and macros.
•History: This mode enables you to review serial data.
Configuring the AVRIQ-SRL module
NOTE: The
Pressing
NOTE: When any Terminal Applications menu is active, pressing Enter saves changes and returns you to the previous screen. Pressing Escape returns you to the previous screen without saving changes.
Within the Terminal Applications menu’s Configuration screen, you can modify the following options:
•Baud Rate: This option allows you to specify the serial port communications speed. Available options are 300, 1200, 2400, 9600, 19,200, 34,800, 57,600 or 115,200 bps. The default value is 9600.
•Parity: This option allows you to specify the serial port’s communications parity. Available options are EVEN, ODD or NONE. The default value is NONE.
•Flow Control: This option allows you to specify the type of serial flow control. Available options are NONE, XOn/XOff (software) and RTS/CTS (hardware). The default value is NONE. If you select a bps rate of 115,200, the only available flow control is RTS/CTS (hardware).
•AutoView/CD Mode: This option allows you to control how the AutoView 3100/3200 switch and CD lines operate. Available options are Always on and Toggle. When in Toggle mode, AutoView and CD lines are turned off for