Axis Communications 540+ Basic Queue-based printing over IP, Installing Axis Network Print Server

Setting Up - NetWare

Notes:

•You cannot type or edit the name manually.

•Make sure that you have PSERVER.NLM running if you selected Remote Printer Mode in step 8.

10.If you want to define a remote printer number slot manually, check the Manual box and type the desired number in the box.

11.Click the OK button to return to the Network Environments window.

Basic Queue-based printing over IP

Installing the

Axis Network Print

Server

Axis print servers with software version 6.0 or later allow users to print in a Pure IP environment using traditional queue-based printing (which usually uses the IPX transport protocol). Note that only NDS queue-based printing is supported.

In the NetWare Pure IP environment, you must use the NetWare Administrator to create the printer, print server and queue objects.

Follow the instructions below to install the Axis Network Print Server in the NetWare Pure IP environment:

1.Start the Configuration Wizard from the User mode in the Axis Network Print Server Web interface.

2.Click your way through the Wizard until reaching the NetWare page.

3.Set the parameters on the NetWare page:

•PSERVER NDS Tree (example: NW5TREE) or

PSERVER NDS File Server: (example: FILESERVERNAME)

•PSERVER NDS Distinguished Name:

(example: AXISXXXXXX.<context>, where <context> is the container where you want to create your print server)

62 AXIS 540+/AXIS 560