Management and Configuration
Using AXIS ThinWizard for Print Server Management
Installing AXIS ThinWizard
Starting AXIS ThinWizard
Important!
AXIS ThinWizard software allows you to manage and upgrade multiple Axis products. Using a standard Web browser, you can find, install, monitor, configure and upgrade your Axis print servers remotely in any TCP/IP network. AXIS Thin Wizard 3.0 is Windows 2000 and Windows XP compatible.
AXIS ThinWizard software is available on www.axis.com
You should only install AXIS ThinWizard on a designated computer on your network.
To install, follow the instructions given by the Installation Wizard. During the installation, you will be asked to enter a user id and a password — these will be used when logging in to AXIS ThinWizard, so please take a note of them.
Follow the instructions below to start AXIS ThinWizard:
1.Make sure that the computer where you installed the AXIS ThinWizard is up and running on your network.
2.Start a Web browser on a client in your network.
3.Enter the IP address or the host name of the computer where you installed AXIS ThinWizard. (If the server is installed on another port than 80, you must enter the port name after the host name or the IP address).
4.The AXIS ThinWizard start page now appears in the Web browser. Enter the user id and password you specified during installation and click Log in.
5.The AXIS ThinWizard interface appears:
These parameters must be enabled in the print server’s web interface for AXIS ThinWizard to function properly:
•FTP_ENB (FTP enabled): click Admin Network Settings Detailed view TCP/IP FTP
Enabed => Yes.
•SNMP_ENB (SNMP Enabled): click Admin Network Settings Detailed view SNMPv1
Enabled => Yes
These parameters are enabled by default in the print server.
AXIS 540+/AXIS 560 | 83 |
