76

Attaching the control panel

➮Hold the control panel at approxi-
mately right angles to the device.
➮Slide the control panel into the de-
vice’s guides that are positioned
on the left and right at the lower
edge of the housing. Push the
control panel carefully into the
bracket until it clicks into place.
➮Flip up the control panel and care-
fully press it into the device until it
clicks into place.
1.
2.
Note:
When attaching the control panel,
make sure you do not press the
display.
If the device was still switched on when
you detached the control panel, it will
automatically switch on with the last
setting activated (radio, DVD/CD, CD
changer or AUX) when the panel is
replaced.

Switching on/off

There are various ways of switching the
device on/off:
Switching on/off using the vehicle
ignition
The device will switch on/off simulta-
neously with the ignition if the device
is correctly connected to the vehicle’s
ignition and you did not switch the de-
vice off by pressing button 1.
Switching the device on/off using
the detachable control panel
➮Detach the control panel.
The device switches off automatically
after approx. one minute.
➮Attach the control panel again.
The device switches on. The last set-
ting (radio, DVD/CD, CD changer or
AUX) will be reactivated.
Switching on/off using button 1
➮To switch on the device, press but-
ton 1.
➮To switch off the device, press and
hold down button 1 for longer
than two seconds.
The device switches off.
Note:
To protect the vehicle battery, the
device will switch off automatically
after one hour if the ignition is off.
SWITCHING ON/OFFCONTROL PANEL
02LasVegasDVD35_gb 08.07.2005, 14:16 Uhr76