81
DANSK
ENGLISH DEUTSCH
FRANÇAIS
ITALIANO
NEDERLANDS
SVENSKA
ESPAÑOL
PORTUGUÊS
Note:
REGIONAL must be activated/de-
activated separately in the menu.
Switching REGIONAL on/off
➮Press the MENU•OK button 7.
“TUNER MENU” appears on the dis-
play.
➮Press the MENU•OK button 7 to
display the tuner menu.
➮Press the or button 6
repeatedly until “REG” appears
on the display. “OFF” or “ON” is
displayed alongside “REG”.
➮To switch REGIONAL on/off, press
the or button 6.
➮Press the MENU•OK button 7
and then the DIS•ESC button 5
to exit the menu.
Switching the RDS function on/off
If you want to use the RDS functions
(AF and REGIONAL),
➮press the MENU•OK button 7.
“TUNER MENU” appears on the dis-
play.
➮Press the MENU•OK button 7 to
display the tuner menu.
“RDS ON” or “RDS OFF” appears on
the display.
➮To switch RDS on/off, press the
or button 6.
➮Press the MENU•OK button 7
and then the DIS•ESC button 5
to exit the menu.
The convenient RDS functions are ac-
tive if the RDS appears on the display.
Selecting the waveband /memory bank
This device can receive programmes
broadcast over the FM frequency range
as well as the MW and LW (AM) wave-
bands. There are three memory banks
available for the FM waveband (FM1,
FM2 and FMT) and one for each of the
MW and LW wavebands.
Five stations can be stored in each
memory bank.
To switch between the FM memory
banks (FM1, FM2 and FMT) and the
MW and LW wavebands,
➮briefly press the BND•TS button
4.
Tuning into a station
There are various ways of tuning into
a station.
Automatic station seek tuning
➮Press the or button 6.
The radio tunes into the next receiva-
ble station.
Tuning into stations manually
You can also tune into stations manually.
Note:
You can only tune into stations
manually if the RDS function is
deactivated.
➮Press the or button 6.
RADIO MODE
02LasVegasDVD35_gb 08.07.2005, 14:16 Uhr81