95
DANSK
ENGLISH DEUTSCH
FRANÇAIS
ITALIANO
NEDERLANDS
SVENSKA
ESPAÑOL
PORTUGUÊS

Selecting menu entries

DVDs generally provide menus in
which you can select among different
options, such as “Start movie”, “Chap-
ter selection”, etc.
To switch between the individual menu
entries,
➮press one of the arrow buttons
/ 6 on the remote con-
trol.
To confirm a menu entry,
➮press the ENTER button > on
the remote control.

Exiting the DVD menu

When you make a corresponding se-
lection in the DVD menu, e.g. the play-
back of the movie, you automatically
leave the DVD menu and the playback
starts.

Displaying the title menu

You can also call the title menu directly
to conveniently select the individual ti-
tles/chapters:
➮Press the TITLE button R on the
remote control.
The title menu appears.
Note:
This function is not supported by
all DVDs.
Playback of DVD audio
This device can also be used to play
DVD audio. The functions described
above can be used provided that the
DVD supports them.
The following functions are particularly
useful for DVD audio.
Repeated playback of a defined
section of a title
You can use the remote control to de-
fine a section of a title and repeat it
endlessly in a loop.
Note:
This function is operable only if an
external display is connected.
To define the starting point of the sec-
tion,
➮listen to a title and press the A-B
button L on the remote control at
the point where you want the re-
peat function to start.
To define the ending point of the sec-
tion,
➮listen to the title again and press
the A-B button L on the remote
control again at the point where
you want the repeat function to
end.
The section of the title is repeated until
you press the A-B button L again.
DVD OPERATION
02LasVegasDVD35_gb 08.07.2005, 14:16 Uhr95