98
●WIDE: The DVD player is con-
nected to a 16:9 monitor. The
wide image is displayed on the
screen at full size.
Displaying the camera perspective
You can specify that a camera symbol
is shown if more than one camera per-
spective is available on the DVD. For
this purpose, select the setting “ON”.
The setting of the camera perspective
is performed under the “Angle Mark”
menu item.
Displaying captions
Captions are special subtitles that can-
not be switched on/off using the subtitle
function of a DVD. You can use this menu
to switch these subtitles on or off. Se-
lect the setting “Off” to switch it off.
DVD/DVD audio priority
DVD audio generally contains audio
data in two versions:
One high-resolution uncompressed
variant and one compressed variant
(e.g. in DTS or Dolby Digital).
Here you can define whether you want
to listen to high-resolution audio data
or to compressed audio data.
Select the “DVD Audio” setting for high-
er quality or “DVD Video” for the com-
pressed version.
The setting of the priority is performed
under the “Priority” menu item.
Audio Setup
The Audio Setup allows you to control
the SPDIF output of the device, set the
PCM channel and set the sampling rate
of the LPCM output. In addition, you
can control the Dynamic Range Con-
trol (DRC) and the HDCD filter.
SPDIF setting
For the SPDIF output of the device, you
can select whether an SPDIF-RAW
signal, an SPDIF-PCM signal a manu-
ally controlled signal should be output
or that the SPDIF output should be
switched off.
Select the desired setting under
“SPDIF Output”.
Notes:
●The SPDIF output is not muted for
traffic announcements, incoming
telephone calls and navigation
voice output.
●The audio data of the DVD drive
are output via the SPDIF output.
PCM channel
The SPDIF output can be used to out-
put the PCM data in the “L/R”, “LS/RS”
or “C/LFE” mode.
The respective setting can be per-
formed under “PCM Channel” in the
“SPDIF Output”.
DVD OPERATION
02LasVegasDVD35_gb 08.07.2005, 14:16 Uhr98