CD MODE
Note:
After you have programmed a playlist and exited the menu with ÒEXITÓ, the playlist is not saved.
Stopping the playlist
To end a running playlist,
➮Press the PROGRAM button K on the remote control.
The programming mode is displayed. The selection mark is positioned on ÒSTOPÓ. To end the playback of the playlist,
➮press the ENTER button >.
Notes:
●If you selected ÒSTOPÓ and con-
firmed it with the ENTER button >, the playlist is deleted.
●If you want to exit the display of the playlist without deleting the
playlist, mark ÒEXITÓ and confirm it with the ENTER button >.
Traffic announcements in CD mode
If you wish to receive traffic announce- ments in CD mode,
➮press the TRAF button 8.
The priority for traffic announcements is activated if the display shows the traf- fic jam symbol. For further details, please read the chapter entitled ÒTraf- fic informationÓ.
Ejecting a CD
➮Press the 
button 2.
The control panel opens out towards you.
➮Press the eject button next to the CD compartment.
The CD is ejected.
➮Remove the CD and close the con- trol panel.
Notes:
●If a CD is ejected, the drive will automatically draw it back in again after approx. 10 seconds.
●CDs can also be ejected if another audio source is active.
108
