RADIO MODE
Browsing through broadcasting networks (only FM)
If a radio station provides several pro- grammes, you have the option of browsing through its
Note:
The RDS function must be activat- ed before you can use this feature.
➮Press the 
or 
button 6 to switch to the next station on the broadcasting network.
Note:
When using this feature, you will only be able to switch to stations that you have received previously. To receive the stations, use the Scan or Travelstore function.
Setting the sensitivity of station seek tuning
You can choose whether the radio should only tune into stations provid- ing good reception or whether it can also tune into those with a weak re- ception.
➮Press the MENU¥OK button 7.
ÒTUNER MENUÓ appears on the dis- play.
➮Press the MENU¥OK button 7 to display the tuner menu.
➮Press the 
or 
button 6 repeatedly until ÒSENSÓ appears on the display.
The display shows the currently set sensitivity level. ÒSENS HI3Ó means that the tuner is set to the highest sensitiv-
ity setting. ÒSENS LO1Ó means it is set to the lowest sensitivity setting.
➮Set the sensitivity level that you
want using the 
buttons 6.
When you have finished making your changes,
➮press the MENU¥OK button 7 and then the DIS¥ESC button 5 to exit the menu.
Note:
You can set different sensitivity levels for FM and MW or LW (AM).
Storing stations
Storing stations manually
➮Select the memory bank that you want (FM1, FM2, FMT) or one of the wavebands (MW or LW).
➮Tune into the station that you want.
➮Press and hold down one of the station buttons 1 - 6 9 for longer than two seconds to assign the station to that button.
Storing stations automatically (Travelstore)
You can automatically store the six sta- tions offering the strongest reception in the region (FM only). The stations are stored in the FMT memory bank.
Note:
Any stations that were previously stored in this memory bank are deleted in the process.
➮Press and hold down the BND¥TS button 4 for longer than two sec- onds.
82
