EQUALIZER
Manually adjusting the equalizer
Notes on adjusting the settings
We recommend you use a CD that you are familiar with for making changes to the settings.
Before adjusting the equalizer, set the sound and volume distribution settings to zero and deactivate
➮Listen to the CD.
➮What kind of impression does the sound make?
➮Now read the ÒSound impressionÓ column in the table entitled ÒHelp adjusting the equalizerÓ.
➮Set the equalizer values as de- scribed in the ÒMeasuresÓ column.
Making adjustments
➮Hold the AUD¥DEQ button :or
the 3D button :on the remote control pressed for more than two seconds.
➮Press the 
or 
button 6 repeatedly until ÒMANUAL EQÓ appears on the display.
➮Press the MENU¥OK button 7or ENTER >on the remote control.
➮Press the 
or 
button 6 re- peatedly until the equalizer that you want to configure (ÒUSER EQ1Ó, ÒUSER EQ2Ó or ÒUSER EQ3Ó) appears on the display.
➮Press the MENU¥OK button 7.
➮Press the 
or 
button 6repeat- edly until the equalizer band that you want to configure (ÒLOW1Ó, ÒLOW2Ó, ÒHIGH1Ó, ÒHIGH2Ó or ÒHIGH3Ó) appears on the display.
➮Press the MENU¥OK button 7.
➮Press the 
or 
button 6repeat- edly until the frequency that you want is displayed.
➮Press the MENU¥OK button 7.
The top line displays the GAIN and the quality factor ÒQÓ. The gain setting flashes. You can use the quality factor to adjust the width of the filter. The high- er you set the value for the quality fac- tor the more directly the filter will be applied to the selected frequency.
To adjust the gain,
➮press the 
or 
button 6. To adjust the quality factor,
➮press the 
button 6.
The quality factor setting flashes.
➮Press the 
or 
button 6 repeatedly until the setting that you want is displayed.
Note:
Please note that you can boost or reduce one frequency in each equalizer band. Proceed in the way described above with all the equalizer bands that you want to adjust.
➮Press the MENU¥OK button 7
and then repeatedly the DIS¥ESC button 5or the AUD¥DEQ button ;for longer than two seconds.
