114
Scanning tracks – SCAN
You can scan (briefly play) all the tracks
on the CD.
➮Press and hold down the MENU•OK
button 7 for longer than two
seconds.
The next track will then be scanned.
“SCAN” briefly appears on the display.
Notes:
●You can set the scanning time.
For further information, please
read the section entitled “Setting
the scanning time” in the “Radio
mode” chapter.
●The Scan function cannot be acti-
vated if it is started at the last title
of a directory.
Cancelling SCAN and continuing
listening to a track
➮Press and hold down the MENU•OK
button 7 for longer than two
seconds.
The currently scanned track will then
continue to be played normally.
Repeated playback of individualtracks or entire directories –REPEAT
To play the current track repeatedly,
➮briefly press the 4 RPT button 9.
“REPEAT TRACK” and RPT appear
briefly on the display.
To repeat the whole directory,
➮press the 4 RPT button 9 again.
“REPEAT DIR” appears briefly on the
display.
Cancelling REPEAT
To stop the current track or current
directory from being repeated,
➮press the 4 RPT button 9 repeat-
edly until “REPEAT OFF” is dis-
played.
RPT disappears from the display.
REPEAT with the remote control
In CD mode, you can select the RE-
PEAT mode with the remote control.
Note:
This function is operable only if an
external display is connected.
To repeat a track,
➮press the PLAY MODE button J
repeatedly until “REPEAT ONE” is
shown on the lowest line of the
external display.
To repeatedly play all the tracks of a
directory,
➮press the PLAY MODE button J
repeatedly until “REPEAT FOLD-
ER” is shown on the lowest line of
the external display.
To cancel REPEAT,
➮press the PLAY MODE button J
repeatedly until “FOLDER” is
shown on the lowest line of the
external display.
Repeated playback of a defined
section of a title
You can use the remote control to de-
fine a section of a title and repeat it
endlessly in a loop.
MP3/WMA MODE
02LasVegasDVD35_gb 08.07.2005, 14:16 Uhr114