Bosch Appliances FW5.50 10.2.1Recording track selection, 10.2.2Standard recording, Stream

Camera Browser Interface Recording en 55

10.2.1Recording track selection

Standard and alarm recording can be defined for the two recording tracks. You must first select the track before setting up the standard and alarm recording parameters.

1.Click the Recording 1 entry in the list.

2.Set up the standard and alarm recording parameters for track 1 as described below.

3.Click the Recording 2 entry in the list.

4.Set up the standard and alarm recording parameters for track 2 as described below.

10.2.2Standard recording

Select the mode for standard recordings:

–Continuous: the recording proceeds continuously. If the maximum recording capacity is reached, older recordings are overwritten automatically.

–Pre-alarm: recording takes place in the pre-alarm time, during the alarm and during the post-alarm time only.

–Off: no automatic recording takes place.

Stream

Select the stream to be used for standard recordings:

–Stream 1

–Stream 2

–I-frames only

10.2.3Alarm recording

Select a period for the Pre-alarm time from the list box.

Select a period for the Post-alarm time from the list box.

Alarm stream

Select the stream to be used for alarm recordings:

–Stream 1

–Stream 2

–I-frames only

Bosch Security Systems Software manual AM18-Q0611 v5.50 2012.03