Bosch Appliances FW5.50 9.1Encoder Profile, 9.1.1Pre-definedprofiles, 9.1.2Changing a profile

44 en Encoder Settings Camera Browser Interface

9.1Encoder Profile

Profiles are rather complex and include a number of parameters that interact with one another, so it is generally best to use the pre-defined profiles. Only change a profile if completely familiar with all the configuration options.

9.1.1Pre-defined profiles

Eight definable profiles are available. The pre-defined profiles give priority to different parameters.

–HD high quality / low latency

High resolution for high bandwidth connections

–HD high quality

High resolution with lower data rate

–HD low bandwidth

High resolution for low bandwidth connections

–SD high quality / low latency

Standard resolution for high bandwidth connections

–SD high quality

Standard resolution with lower data rate

–SD low bandwidth

Standard resolution for low bandwidth connections

–DSL

Standard resolution for DSL connections

–ISDN (2B)

Low resolution for mobile phone connections

9.1.2Changing a profile

The pre-defined profiles can be changed (a pre-defined profile can always be recalled by using the Default button).

To change a profile, select it by clicking its tab, then change the parameters within that profile.

If a setting outside the permitted range for a parameter is entered, the nearest valid value is substituted when the settings are saved.

AM18-Q0611 v5.50 2012.03 Software manual Bosch Security Systems