Camera Browser Interface | Network en 85 |
|
|
2.Enter the Password that the Radius server expects from the camera.
14.2.5RTSP port
If necessary, select a different port for the exchange of the RTSP data from the list. The standard RTSP port is 554. Select Off to deactivate the RTSP function.
14.2.6UPnP
Select On to activate UPnP communication. Select Off to deactivate it.
When UPnP is activated the camera reacts to requests from the network and is registered automatically as a new network device on the inquiring computers.
Note:
To use the UPnP function on a computer with Windows XP or Windows Vista, the Universal Plug and Play Device Host and the SSDP Discovery services must be activated
This function should not be used in large installations due to the large number of registration notifications.
14.2.7TCP metadata input
The device can receive data from an external TCP sender, for example an ATM or POS device, and store it as metadata. Select the port for TCP communication. Select Off to deactivate the function. Enter a valid Sender IP address.
14.2.8Quality of Service
The priority of the different data channels can be set by defining the DiffServ Code Point (DSCP). Enter a number between 0 and 252 as a multiple of four. For alarm video you can set a higher priority than for regular video and you can define a Post Alarm Time over which this priority is maintained.
Bosch Security Systems | Software manual |
