Bosch Appliances FW5.50 software manual 10.1.3Activating and configuring storage media

52 en Recording Camera Browser Interface

SD card recording performance is highly dependent on the speed (class) and performance of the SD card. An SD card of Class 4 or higher is recommended.

Note:

If a device had primary and secondary recording running on the SD card and is then added to a VRM system, the blocks used for primary recording will not be re-used, reducing the available recording space for ANR recording. This can be solved by re- formatting the SD card.

Throughput limit for simultaneous recording and local replay at

100% playback speed is:

–maximum total recording bit rate of 7 Mbps for external iSCSI recording.

–maximum total recording bit rate of 10 Mbps for SD card recording, depending on SD card performance.

10.1.3Activating and configuring storage media

Available media or iSCSI drives must be transferred to the Managed storage media list, activated, and configured for storage.

Note:

A iSCSI target storage device can only be associated with one user. If a target is being used by another user, ensure that the current user no longer needs the target before decoupling that user.

1.In the Storage overview section, double-click the required storage medium, an iSCSI LUN or one of the other available drives.

–The medium is added as a target in the Managed storage media list.

–Newly added media is shown as Not active in the Status column.

AM18-Q0611 v5.50 2012.03 Software manual Bosch Security Systems