Bosch Appliances FW5.50 software manual Appearing edges, Selecting the area

74 en Setting up VCA Camera Browser Interface

Appearing edges

Select this option if the selected area of the reference image includes a largely homogenous surface. If structures appear in this area, then an alarm is triggered.

Selecting the area

Select the image areas in the reference image that are to be monitored. The video image is subdivided into square fields. Activate or deactivate each of these fields individually.

Select only those areas for reference monitoring in which no movement takes place and that are always evenly lit, as false alarms could otherwise be triggered.

1.Click Select Area to configure the sensor fields. A new window opens.

2.If necessary, click Clear All first to clear the current selection (fields marked yellow).

3.Left-click the fields to be activated. Activated fields are marked yellow.

4.If necessary, click Select All to select the entire video- frame for monitoring.

5.Right-click any fields to deactivate.

6.Click OK to save the configuration.

7.Click the close button (X) in the window title bar to close the window without saving the changes.

AM18-Q0611 v5.50 2012.03 Software manual Bosch Security Systems