Bosch Appliances FW5.50 11.4Alarm E-Mail, 11.4.1Send alarm e-mail, 11.4.2Mail server IP address

66 en Alarm Camera Browser Interface

11.4Alarm E-Mail

Alarm states can be documented by e-mail. The camera automatically sends an e-mail to a user-defined e-mail address. This makes it possible to notify a recipient who does not have a video receiver.

11.4.1Send alarm e-mail

Select On for the device to automatically send an alarm e-mail in the event of an alarm.

11.4.2Mail server IP address

Enter the IP address of a mail server that operates on the SMTP standard (Simple Mail Transfer Protocol). Outgoing e-mails are sent to the mail server via the address entered. Otherwise, leave the box blank (0.0.0.0).

11.4.3SMTP user name

Enter a registered user name for the chosen mail server.

11.4.4SMTP password

Enter the required password for the registered user name.

11.4.5Format

Select the data format of the alarm message.

–Standard (with JPEG): e-mail with JPEG image file attachment.

–SMS: e-mail in SMS format to an e-mail-to-SMS gateway without an image attachment.

When a mobile phone is used as the receiver, make sure to activate the e-mail or SMS function, depending on the format, so that these messages can be received. Obtain information on operating your mobile phone from your mobile phone provider.

11.4.6Image size

Select the size of the JPEG images that are to be sent from the camera.

AM18-Q0611 v5.50 2012.03 Software manual Bosch Security Systems