Bosch Appliances FW5.50 6.3Date/Time, 6.3.1Date format, 6.3.2Device date / Device time

30 en Advanced General Settings Camera Browser Interface

6.3Date/Time

6.3.1Date format

Select the required date format.

6.3.2Device date / Device time

If there are multiple devices operating in your system or network, it is important to synchronize their internal clocks. For example, it is only possible to identify and correctly evaluate simultaneous recordings when all devices are operating on the same time.

1.Enter the current date. Since the device time is controlled by the internal clock, it is not necessary to enter the day of the week – it is added automatically.

2.Enter the current time or click Sync to PC to apply the system time from your computer to the device.

Note:

It is important that the date/time is correct for recording. An incorrect date/time setting could prevent correct recording.

6.3.3Device time zone

Select the time zone in which the system is located.

6.3.4Daylight saving time

The internal clock can switch automatically between normal and daylight saving time (DST). The device already contains the data for DST switch-overs up to the year 2015. Use this data or create alternative time saving data, if required.

Note:

If a table is not created, there is no automatic switching. When editing the table, note that values occur in linked pairs (DST start and end dates).

AM18-Q0611 v5.50 2012.03 Software manual Bosch Security Systems