Camera, Installer Menu | Bosch Appliances FW5.50 specs

38 en Camera	Camera Browser Interface

8Camera

8.1Installer Menu

8.1.1Mirror image

Select On to output a mirror image of the camera picture.

8.1.2Flip image

Select On to output an upside down camera image.

8.1.3Main frequency and Operation environment

Select 50 Hz or 60 Hz as the main frequency, and Indoor or Outdoor for the operation environment.

8.1.4Exposure/frame rate

–Auto exposure/frame rate: the camera automatically sets the framerate. The camera tries to maintain the selected default shutter speed as long as the light level of the scene permits.

Select a minimum frame rate from 1.875 to 30 ips.

–Fixed exposure: allows a user-defined shutter time. Select the shutter speed when exposure control is set to fixed (1/25, 1/33, 1/50, 1/100 for 50 Hz) or (1/30, 1/40, 1/ 60, 1/120 for 60 Hz) for indoor operation. For outdoor operation select between 1/30 and 1/15000.

8.1.5Reboot device

Click Reboot to restart the camera.

8.1.6Factory defaults

Click Defaults to restore the factory defaults for the camera. A confirmation screen appears. Allow 5 seconds for the camera to optimize the picture after a mode reset.

AM18-Q0611 v5.50 2012.03

Software manual

Bosch Security Systems

Image 38

Bosch Appliances FW5.50 software manual Camera, Installer Menu

Contents

Camera Browser Interface Page Table of Contents Advanced General Settings Web Interface Encoder Settings Camera Alarm Recording Setting up VCA Interfaces Network Service Browser connection System requirements Protected network Password protection in cameraEstablishing the connection 192.168.0.1 Livepage SettingsSystem Overview Recordings Operation via the browser Image selection Status icons Storage discovery Cameras with PTZ controlMotion flag Pan and tilt Pre-position Cameras with alarm and relay I/OSystem Log / Event Log Running recording program Saving snapshotsRecording video sequences Audio communication Processor load Selecting Recordings Export to FTP Slide control Controlling playbackControl buttons Bookmarks Basic Mode Advanced Mode Settings OverviewConfiguration Menu Saving changes NavigationMaking Changes Password Basic ModeDevice Access Naming Date/Time PasswordConfirm password Device date, time and zone IP address Click Set and RebootNetwork Subnet mask Recording EncoderAudio System Overview 1 ID Advanced General SettingsIdentification ISCSI Initiator extension Password Confirm password Device time zone Date formatDevice date / Device time Daylight saving time Time server IP address Time server type Camera name stamping Alarm mode stampingDisplay Stamping Time stamping Alarm message Video watermarking Web Interface Appearance Livepage Functions Allow local recording Show system logAllow snapshots Frame only stream Save system log LoggingSave event log File for event log Installer Menu Camera Picture Settings White balance 2 Day/Night Encoder Settings Pixel Counter Select G.711, L16 or AAC* as the audio Recording format Encoder Settings Changing a profile Encoder ProfilePre-defined profiles Target bit rate Standard definition video resolutionProfile name Maximum bit rate Expert Settings Default Encoder Streams 1 H.264 settingsSelect H.264 Settings Preview Jpeg stream Recording Recording media Storage ManagementDevice manager ISCSI Media Activating and configuring storage media Formatting storage media Deactivating storage media Recording includes Stream profile settingsRecording Profiles Standard recording Alarm recordingRecording track selection Alarm triggers Motion/Audio alarm Video loss alarm Retention Time Holidays Recording SchedulerWeekdays Recording status Profile namesActivate recording Recording Status Alarm Alarm Connections Remote port Video transmissionStream Video output Audio SSL encryptionAuto-connect Video Content Analyses VCA Audio Alarm Alarm E-Mail Sender name Attach Jpeg from cameraDestination address Test e-mail Setting up VCA VCA Silent MOTION+ VCA Profiles Aggregation time s Sensitivity Analysis typeMotion detector Debounce time 1 s Tamper detectionMinimum object size Selecting the area Global change Trigger delay sGlobal change slider Scene too bright Reference check Scene too darkScene too noisy Appearing edges VCA Scheduled Deleting Holidays Trigger Delay sVCA Event triggered Trigger active Relay Alarm inputInterfaces Automatic IP assignment Network AccessNetwork IP V4 address Http browser port IP V6 addressDNS server address Https browser port Telnet support Interface mode ETH14.1.8 RCP+ port Network MSS Byte Host name Enable DynDNSNetwork MTU Byte User name Status Snmp AuthenticationAdvanced 14.2.2 1. Snmp host address / 2. Snmp host address UPnP Quality of ServiceRtsp port TCP metadata input Multicast Address EnableMulticast Multicast packet TTL PortStreaming FTP server FTP PostingJpeg posting Path on FTP server FTP server passwordIP V4 filter Firmware ServiceMaintenance Configuration SSL certificate Maintenance log Page Bosch Security Systems