88 en Network

Camera Browser Interface

 

 

14.4FTP Posting

The FTP server is used for JPEG posting and the export of recordings.

14.4.1JPEG posting

Save individual JPEG images on an FTP server at specific intervals. JPEG resolution corresponds to the highest setting from the two data streams.

Image size

Select the size of the JPEG images that are to be sent from the camera.

File name

Select how file names are created for the individual images that are transmitted.

Overwrite: The same file name is always used and any existing file will be overwritten by the current file.

Increment: A number from 000 to 255 is added to the file name and automatically incremented by 1. When it reaches 255, it starts again from 000.

Date/time suffix: The date and time are automatically added to the file name. When setting this parameter, ensure that the date and time of the device are always set correctly. For eample, the file snap011005_114530.jpg was stored on October 1, 2005 at 11.45 and 30 seconds.

Posting interval

Enter the interval in seconds at which the images are sent to an FTP server. Enter zero for no images to be sent.

14.4.2FTP server

FTP server IP address

Enter the IP address of the FTP server.

FTP server login

Enter your login name for the FTP server.

AM18-Q0611 v5.50 2012.03

Software manual

Bosch Security Systems

Page 88
Image 88
Bosch Appliances FW5.50 software manual FTP Posting, Jpeg posting, FTP server